Pugski.com and Toko US are proud to announce a partnership for the 2020-21 season. Toko will be the official supplier of ski waxes and tuning supplies for Pugski.com's test fleet of skis. We at Pugski have always said that when testing a ski, the tune is taken into consideration and Pugski.com's...
justin koski
phil pugliese
pugski.com official supplier of waxes
pugski.com toko us partnership
ski testing
skituningski wax
sun valley
the traditional swiss brand
toko
toko us
us ski and snowboard hall of fame
Well, my 2 yr old Swix T72 just crapped out the last day of our trip in Val D’Isere. In fact it died in the middle of waxing my last ski of the tuning session. It plugs in and the digital display works, but I can’t get it to heat up at all.
It any case, I need a new iron that will last longer...
holmenkol electronic racing waxer 230 v
microprocessor controlled
skituningski waxing iron recommendations
star analog 110v 160c iron
star iron
toko iron
wax iron
waxing skis
So the snow finally arrived and I am in a mad rush to get all our skis ready for the season. So far I have removed storage wax and prepped 11 pairs of skis with fresh wax and have another three pairs to go. Needless to say that is a lot of scraping. A couple seasons back I invested in a roto...
better solution to removing ski wax than scraping?
crayoning (no scraping)
hot touch crayoning
hot waxing (with scraping)
reduces the volume of wax to be scraped
roto brush
skituningski waxing
skimd pro-glide
use the high friction pro-glide tool
using a fiberlene sheet
Ten years ago this month we bought an old bread truck and our first stone grinder, and just like that Smooth Rides was officially tuning skis door-to-door. This picture was right after we had the logos installed and we were ready for business. Things have changed like crazy over the years with...
I know the pattern of a base grind makes a big difference in how the ski performs.
While looking for an image of the AM Bell Grind from @smoothrides I stumbled upon some images from their FB page and I needed to share these here.
Aren't they beautiful?
:drool:
Grind of the day: AM Bell. We...
Hi
Two seasons ago I learned how to wax my own skis.
Now I am thinking about tuning.
Is it possible to do some basic tuning with some basic affordable hand tools? If so, any good youtube videos anyone recommends?
I am trying to stay away from investing in a bunch of $$ tools. However if...
basic skituning
bench
coarse diamond stone
dedicated edge guide at your preferred angle
file guide
fine diamond stone
fine file
skituningskituning videos
ski vice
spring clamp
Hello All,
I purchased a new pair of Stockli Laser AX at the end of the season. I’ve not skied them yet. I’ve read several threads here on new ski tuning, but I’m not clear on something: do Stockli skis need a new ski tune or is the factory tune good to go? Thanks!
coaches skis
fixing skis with a bottom bevel of 7
get back to 1.0 base bevel
issues with buying used skis
issues with ski base
ski base grind
skituning
Some people get a special base structure put on in the spring to battle sticky snow. I've never done this. I've been worried it would shorten the life of my skis, if not the base itself then the metal edges. That structure needs to be replaced again before the next season, doesn't it? This...
aggressive spring structure
dedicated spring ski
dedicated spring structure skis
ski base structure
ski base structure for sticky spring snow
skituning
sticky spring snow
stone-grinding skis
tuning for spring skiskiing
white ribbon of death
wrod
Ok, I said I would post a simple and inexpensive way to measure base bevel angles. I will discuss side bevel angles measurement too. There are several tools out there that do the job well, but are in the $300 dollar range, roughly. If you have a true bar, or straight edge, you can do it for...
I'm thinking about buying either a Swix EVO Pro Edger or a Razor-Tune. My friends all like the RT, but I want to compare it to an EVO before I buy. Does anyone have any experience with either machine? Which is easier to use? Which could do more damage?
dm
Just starting out on tuning and waxing and looking for some clarification regarding the dominator wax for my Renoun E98s. Only skied them 4 times and just had a machine wax job done before heading out so they are basically new. Already hit up tuning tools questions in the last thread, but want...
I’m going to get the bases ground as I have a few base high & edge high spots on both skis. It’s time to fix it.
I was going to request a 1deg base, but torn between 2 or 3 deg edge. I’ve never touched these skis (new this year). I use a 1:3 on my Brahmas.
This is for use in VT in varying...
Hi folks! I've been reading these forums for a couple seasons & finally decided I need to make an account.
I've recently started tuning my own edges & I've run into an issue someone here might be able to diagnose. It's somewhat hard to describe, but I'll give it a shot. I started with my older...
base bevel is too low
burrs
ski base grind
ski base is concave
skituningskituning tools
skis skied poorly after self tuning
sks multi-tool file guide from racewax
worked in only the tip to tail direction
Hi all
Where are Canadians buying their tuning/waxing tools? I've been looking online, and the prices stores charge up here seems to me offensively expensive for what you get. Do these items ever typically come on sale?
Matt
Well, I did it! Razor-Tune Full Race Kit coming. Swapped the 2 degree plate for a 4. Should be here Wednesday!
Will report back! Part of my motivation was, I just can't bring myself to diamond stone off the amazing ceramic disc finish on my new Enforcer 100's! By the way, they skied...
Hey Guys/Gals,
I'm new to the self tuning / waxing but after reading a ton in this forum and watching a lot of youtube videos, I gave it a go at my first tuning session over the weekend. My question is that I bought a cheap Wintersteiger iron and it seems to take forever to melt wax on the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.