- Joined
- Jan 15, 2018
- Posts
- 67
When adjusting the toe height on Salomon Warden MNC 13 bindings, I know you’re supposed to pull the boot backwards while testing the toe height with a shim. I did this recently, however when I then clipped into the binding, I noticed a lot of play up and down in the toe piece. While wearing the boot, I stepped into the binding and pulled my foot back hard, while adjusting the toe height until I could barely remove the shim. Is this the correct method, or should it be done with the boot NOT on my foot?
Thanks for any help
Thanks for any help